Direct Drive Gas-Fired Heater, ETL Listed, for use in tempering make-up air. 5000 CFM

Direct Gas Fired Heated Make Up Air Unit with 20" Direct Drive Fan

• Supply Fan handles 5000 CFM @ 0.659" wc ESP, Fan runs at 1805 RPM.
• Heater supplies 293794 BTUs. 55°F Temperature Rise. [Fuel: Natural Gas]
• Supply Motor: 5.000 HP, 3 Phase, 208 V, 60Hz, 15.0 FLA, ODP, Premium (E-Plus3) Eff.
• Down Discharge - Air Flow Right -> Left

Construction Features:

• Sloped Filtered Intake for Size #2 Modular Heater. 26.813" Wide X 53.625" Long X 31.313" High.
• Includes 3x MV EZ Kleen Metal Mesh Filter. 20"x 25"x 2"
• Unit mounted: 0-150°F Discharge Temp Control, Heating Activation Based On Intake Set Point, Manual Blower Mode. Use with MUA – remote controlled HMA’s can be ordered separately
• Motorized Back Draft Damper 22.75" X 24" for Size 2 Standard & Modular Heater Units w/Extended Shaft, Standard Galvanized Construction, 3/4" Rear Flange, Low Leakage, LF120S Actuator Included
• Low Fire Start. Allows the burner circuit to energize when the modulation control is in a low fire position.
• Gas Pressure Gauge, 0-35", 2.5" Diameter, 1/4" Thread Size
• Gas Pressure Gauge, -5 to +15 Inches Wc., 2.5" Diameter, 1/4" Thread Size
• VAV (Variable-Air-Volume) Wiring Package for Commercial Fans. Manual Speed Control Variable Frequency Drive Included
• Supply Variable Frequency Drive - 5 HP Max., 200/240 V, Three Phase, 16.5 A Max., NEMA 1 Enclosure, (Default Shipped Loose for Field Installation) PART NEEDS PROGRAMMING
• VFD factory mounted and wired on unit control panel.