10' ETL & NSF Stainless steel system with fans and curbs

* Fast Lead Times on Hood Packages.  Please contact us with your zip code for accurate quote *

This package includes a Hood, an Exhaust fan, a Heated Make Up Air Unit, and roof curbs.

Need a utility cabinet? Contact us for a free utility cabinet with the purchase of our Electrical Smart Controls

Hood Specifications

10' long exhaust-only wall canopy hood with front perforated supply plenum with built-in 3" back standoff.

• 430 Stainless Steel Construction (Where Exposed)
• 54" depth provides better capture and containment of cooking vapors at lower airflow volumes.
• 600 degree hood rating - allows use with medium to heavy duty cooking equipment providing ultimate flexibility.
• 16" tall x 20" wide Kleen-Gard Stainless Steel Baffle Filter with Handles and Bottom Hanging Hook, UL Classified
• Premium Recessed Round LED fixture and LED Light, 3500 K warm output
• EXHAUST RISER - Factory installed 16" Diameter
• SUPPLY RISER - 12"x 24" Supply Riser with Volume Dampers
• 1/2 Pint Grease Cup New Style, Flanged Slotted

Exhaust Fan Specifications

High Speed Direct Drive Centrifugal Upblast Exhaust Fan with speed control (single phase only), disconnect switch and 15-3/4" wheel.

• Exhaust Fan handles 2250 CFM @ -0.750" wc ESP, Fan runs at 1302 RPM
• Exhaust Motor: 0.750 HP, 1 Phase 115 V, 60Hz, 13.0 FLA, Electronically Commutated (EC) motor
• Grease Cup for kitchen-duty centrifugal exhaust fans, Box Dimensions 15-3/4 L X 5-1/16 W X 3-3/4 H (18 GA.) (Includes Down Spout)
• Curb CRB23X20E On Fan # 1 Flat Curb
• Hinged Base for Curb. Standard Hinge attached to curb. Used on Fans with wheels 20 inches or smaller. 12 GA Galvanized
• Vented Base for Curb

Heater Specifications

Direct Gas Fired Heated Make Up Air Unit with 10" Blower.

• Supply Fan handles 1800 CFM @ 0.500" wc ESP, Fan runs at 983 RPM
• Heater supplies 110484 BTUs. 55°F Temperature Rise. [Fuel: Natural Gas]
• Supply Motor: 1.000 HP, 1 Phase 115 V, 60Hz, 14.0 FLA, ODP (Open Drip Proof)
• Down Discharge - Air Flow Right -> Left
• Sloped Filtered Intake for Size #1 Modular Heater. 21.813" Wide x 44.375" Long x 23.375" High. Includes 2" MV EZ Kleen Metal Mesh Filters
• RTC Solutions • 40-90°F Discharge Temp Control
• Gas Manifold for DF1 GM - BTU 0 - 550001 - 7 in. w.c. - 14 in. w.c., No Insurance Requirement (ANSI), BV250-66
• Motorized Back Draft Damper 16" X 18" for Size 1 Standard & Modular Direct Fired Heaters w/Extended Shaft, Standard Galvanized Construction, 3/4" Rear Flange, LF120S Actuator Included
• Low Fire Start. Allows the burner circuit to energize when the modulation control is in a low fire position
• Gas Pressure Gauge, 0-35", 2.5" Diameter, 1/4" Thread Size
• Gas Pressure Gauge, -5 to +15 Inches Wc., 2.5" Diameter, 1/4" Thread Size
• Curb CRB21X71X20INS Insulated On Fan # 2 Flat Curb