6' ETL & NSF Stainless steel system with fans and curbs

* Fast Lead Times on Hood Packages.  Please contact us with your zip code for accurate quote *

This package includes a Hood, an Exhaust Fan, a Heated Make Up Air Unit, and roof curbs

Need a utility cabinet? Contact us for a free utility cabinet with the purchase of our Electrical Smart Controls

Hood Specifications

6ft long exhaust-only wall canopy hood with front perforated supply plenum with built-in 3" back standoff.

• 430 Stainless Steel Construction (Where Exposed)
• 54" depth provides better capture and containment of cooking vapors at lower airflow volumes.
• 600 degree hood rating - allows use with medium to heavy duty cooking equipment providing ultimate flexibility.
• 16" tall x 16" wide Kleen-Gard Stainless Steel Baffle Filter with Handles and Bottom Hanging Hook, UL Classified
• 16" tall x 20" wide Kleen-Gard Stainless Steel Baffle Filter with Handles and Bottom Hanging Hook, UL Classified
• Incandescent Light Fixture-High Temp Assembly, Includes Clear Thermal and Shock Resistant Globe (L55 Fixture), Bulbs By Others
• EXHAUST RISER - Factory installed 12" Diameter
• SUPPLY RISER - 10"x 28" Supply Riser with Volume Dampers
• 1/2 Pint Grease Cup New Style, Flanged Slotted

Exhaust Fan Specifications

High Speed Direct Drive Centrifugal Upblast Exhaust Fan with speed control (single phase only), disconnect switch and 13-3/4" wheel.

• Exhaust Fan handles 1350 CFM @ -0.750" wc ESP, Fan runs at 1403 RPM
• Exhaust Motor: 0.500 HP, 1 Phase 115 V, 60Hz, 8.1 FLA, ODP (Open Drip Proof)
• Grease Cup for kitchen-duty centrifugal exhaust fans, Box Dimensions 15-3/4 L X 5-1/16 W X 3-3/4 H (18 GA.) (Includes Down Spout)
• Curb CRB19.5X20E On Fan # 1 Flat Curb
• Hinged Base for Curb. Standard Hinge attached to curb. Used on Fans with wheels 20 inches or smaller. 12 GA Galvanized
• Vented Base for Curb

Heater Specifications

Low CFM Direct Fired Heater. Belt Drive.

• Supply Fan handles 1080 CFM @ 0.300" wc ESP, Fan runs at 1622 RPM
• Heater supplies 66290 BTUs. 55°F Temperature Rise. [Fuel: Natural Gas]
• Supply Motor: 1.000 HP, 1 Phase 115 V, 60Hz, 14.0 FLA, ODP (Open Drip Proof)
• Down Discharge - Air Flow Right -> Left
• Screen Intake Hood with EZ Filter
• RTC Solutions • 40-90°F Discharge Temp Control
• Gas Manifold for Commercial GM - BTU 0 - 241291 - 7 in. w.c. - 14 in. w.c., No Insurance Requirement (ANSI), BV250-44
• Motorized Back Draft Damper 13" X 17" for D76 Compact Direct Fired Heaters w/Extended Shaft, Standard Galvanized Construction, 3/4" Rear Flange, TF120S Actuator Included
• Gas Pressure Gauge, 0-35", 2.5" Diameter, 1/4" Thread Size
• Gas Pressure Gauge, -5 to +15 Inches Wc., 2.5" Diameter, 1/4" Thread Size
• Curb CRB19.5X52X20INS Insulated On Fan # 2 Flat Curb